enLanguage

Knowledge

Manufacturing process and process of butt welding flange

Producing a qualified flange requires a lot of complicated and professional steps and processes. The first is raw materials. Raw materials must undergo strict chemical composition testing and classification when they enter the factory, so as to prevent unqualified products from the source and avoid mixing materials. The second is blanking. Flanges of different specifications will use raw materials of different sizes and specifications. The raw materials are roughly divided into: round steel, square steel, slab and steel ingot. The blanking workshop will decide which form of raw material to use for cutting and blanking according to the blanking size and specifications of the flange. Thirdly, forging hammer processing. After receiving the cut raw materials, the forging hammer workshop will carry out furnace heating and forging. First, the cut raw materials will be loaded into the natural gas furnace and heated to about 1000 degrees for forging to make billets. For some special materials or too large specifications, because the temperature will drop as the forging time increases, it will not be formed in one forging, but will be heated in a second furnace to continue forging. Fourth, heat treatment. The forged blank will be sent to the heat treatment workshop for professional heat treatment. Heat treatment is also a critical step, because flanges of different materials have different heat treatment processes. If the treatment is not good, it will directly affect the flange. Whether the hardness and tensile mechanical properties of blue are qualified. Fifth, the machined and heat-treated flanges will be sent to the machining workshop. The company has 30 full CNC machine tools, and the master lathe will carry out full CNC programming according to the drawings to ensure the size and smoothness. Sixth, inspection. Every piece of flange we produce will be strictly inspected. Qualified products will be marked and packaged. Logo printing will generally be printed according to customer requirements. We use wooden boxes and pallets for packaging. The inside will be equipped with a sealing surface protection cover and will be treated with moisture-proof and rust-proof treatment, and the box will be ensured to be tight to avoid bumps and bumps on the sea.

You Might Also Like

Send Inquiry