Do Ordinary Carbon Steel Flange Has Anticorrosive Function Or Not
Are ordinary carbon steel flanges corrosion resistant? Shanxi Hongkai Forging Co., Ltd. here to answer your question.
According to the different materials, can be divided into carbon steel flange, stainless steel flange and alloy steel flange. Carbon steel flange is made of carbon steel material. According to the content of trace elements, it can be divided into type A105, type Q235, type 16Mn, type 20, etc. Carbon steel flange itself does not have anti-corrosion function, the main anti-corrosion treatment methods are oil coating, spray painting and galvanized. According to the production process can be divided into forging flange, casting flange, plate rolling and cutting flange. In these respects, the forging flange quality is good, followed by rolling and casting.
Forged flange is a product with excellent mechanical properties. The raw material is usually billet, which is heated after cutting. The billet is heated and put into the mold, and hammered continuously to eliminate the segregation, porosity and bubbles inside the billet. Forged flange has good pressure and temperature resistance, and is generally suitable for high temperature and high pressure environment.
The blank shape and size is accurate, the processing amount is small, the cost is low, but the casting flange will have pores, cracks and impurities, and the internal flow line of the casting is poor. The advantage is that more complex shapes can be made and production costs are lower. Because the carbon content of ordinary carbon steel flange is lower than that of casting flange, it is not easy to rust, and the structure is dense, and can withstand large shear and tension, so the mechanical property is better than that of forged flange. General carbon steel and casting flanges are not easy to distinguish only in appearance.
First, relative to the price, flange castings on the market are cheaper, followed by forging. The price is higher than that of pure forgings. Second, do the failure test, separate the flange. Castings have sand holes, but pure forgings do not. Sometimes there are cracks in the forgings. In terms of tolerance and surface finish, castings generally have a negative tolerance of 1-5 mm, irregular edge chamfering, non-smooth burrs in holes, and small forged flange tolerances. When the weight is the same, the same size, the casting will be lighter than the forging.

