enLanguage

Knowledge

Introduction to Butt Welding Flanges and Carbon Steel Flanges

Butt welding flanges and pipes are connected by butt welding

 

There are three types of sealing surfaces for carbon steel butt welding flanges: lubricated, concave-convex, and grooved. Lubricated butt weld flanges have great applications. It is generally used in medium medium conditions, such as low-pressure non-purified compressed air, low-pressure circulating water, and its advantage is that the price is relatively cheap. Carbon steel welded flanges are suitable for high-pressure or temperature-fluctuating pipelines, or high-pressure, high-temperature and low-temperature pipelines, as well as flammable and explosive pipelines. The welding method for the flange and pipe connection of the butt welding flange is butt welding. Welds are similar to pipe and pipe welds. Usually, the pipe diameter is small, argon arc welding is used to make the bottom, and the cover is welded by hand. The diameter of the pipe is large, and double-sided welding is used. Butt welding flanges are widely used, and the scope of application is determined according to different characteristics.

 

Quenching of carbon steel flange is to optimize uniform structure

 

The quenching of carbon steel flange is aimed at optimizing and uniform structure, removing dendrite shrinkage and thermal stress, and reducing strength. After heating to a moderate temperature and maintaining it for a certain period of time, it is cooled to room temperature with slowly flowing water to obtain a close to equilibrium state. Organizational processing techniques. Quenching is usually used for preparatory quenching and tempering treatment. For carbon steel flanges whose structure and properties are too low, quenching can also be used as the basis for final quenching and tempering treatment of parts. There are many common annealing methods. The annealing temperature of various steel parts, the heating speed of carbon steel flanges, and the heat insulation time must be selected according to the specific conditions of the composition and the structure of the parts. Taking the component structure of the same carbon steel flange as an example, as the complexity of the component structure increases, the heating rate gradually slows down or must be stepped up.

You Might Also Like

Send Inquiry