enLanguage

Knowledge

Welding of high-pressure butt welding flanges, loopers, threads, lap joints, and blind flanges

Flange welding is to fix two flange parts together by welding, usually by arc welding or gas welding. This welding method is often used to connect the flange joints of pipes, containers and equipment.

The welding process of flanges includes the steps of preparation, positioning, alignment, heating and welding. First of all, make sure that the surface of the two flange parts is flat and clean, and process the corresponding interface. The flanges are then placed into the joint, positioned and aligned with jigs. Next, heat the butt joint surface with a heat source such as gas welding or arc welding to reach the welding temperature. Finally, the welding rod or wire is added to the interface to form the weld.

The welding of the flange has the characteristics of high strength, good sealing, corrosion resistance, etc., and can be applied to the transportation and storage of various fluid media. However, the quality of welding has a crucial impact on the service life and safety of equipment, so strict control and supervision of welding technology is required.

 

Flange welding materials usually have the following types:

1. Welding steel: Different steels can be selected according to specific conditions, such as ordinary carbon steel, alloy steel, stainless steel, etc. The selection should be based on factors such as the use environment and pressure.

2. Welding rods: Welding rods are needed when welding steel, and the common ones are oxalic acid type and basic type. The oxalic acid type electrode slag is easy to clean and is suitable for low temperature and pressure applications. The basic type electrode has good welding performance and is suitable for high temperature and high pressure applications.

3. Valve seat material: The valve seat material is a very important part of the flange connection. Metal or non-metal materials can be used, such as silicone rubber, polytetrafluoroethylene (PTFE), etc.

4. Sealing material: The sealing material of the flange connection is also very important, and different materials can be used, such as asbestos rubber sheet, flexible graphite sheet, etc.

5. Bolts and nuts: The bolts and nuts of the flange connection are generally made of carbon steel or alloy steel, and their specifications and lengths should be selected according to the actual situation.

You Might Also Like

Send Inquiry