enLanguage

Knowledge

What Requirements Should Stainless Steel Flange Meet When Producing

There are certain technical parameters and requirements for the production and use of stainless steel flange, and there are certain process methods and principles for production and welding, in order to ensure that under good conditions can be used and promoted in accordance with certain methods and principles.

 

In the production and welding process of stainless steel flange, the process parameters should be strictly controlled to ensure that the flange in production and use play a large role and value. Stainless steel flanges produced by casting and rolling processes are usually forged. When steel plate or section steel is used, the following requirements shall be met:

 

1.Stainless steel flange should be ultrasonic detection, and can not appear stratification defects.

 

2.The butt welding of ring parts should adopt full penetration weld.

 

3.Cut into strips along the rolling direction, bend the butt weld into an ring, so that the steel surface forms an annular cylinder. Butt welding flange neck can not be directly processed with steel plate.

 

4.Heat treatment shall be carried out after butt welding of ring joint, X-ray inspection shall reach JB4730 level 2 standard, X-ray or ultrasonic inspection shall reach 100%, ultrasonic inspection shall reach JB4730 Level 1 standard.

 

Stainless steel flange without deformation, good sealing, a wide range of uses. Use a more complex drum structure. It is used for pipelines with large pressure or temperature fluctuations or pipelines with high pressure, high temperature and low temperature. There are corresponding stiffness and elasticity requirements, the transition of stainless steel thinning flange is reasonable. Welding distance is large, no welding temperature deformation phenomenon occurs on the joint surface; Usually large PN is used. Connect to 2.5 mpa pressure pipes and valves; It is also used to transport expensive, flammable and explosive media.

 

230505 4

 

 

You Might Also Like

Send Inquiry