enLanguage

News

Assembly And Welding Operations Of Stainless Steel Flanges

When stainless steel flange pipe fittings are welded, carbides are precipitated after repeated heating, which reduces the mechanical properties. The straight pipe of stainless steel flange pipe has a metallic luster, and the straight pipe of rippling pipe is too thin to be ground, polished and cleaned, just use hand emery cloth to polish it.


Welding assembly: Due to processing errors, sometimes the gap is too large, and it is easy to burn through during welding. The disposal method may overlap the local (individually 3~5mm) surfacing layer on the stainless steel flange pipe. ~0.05mm gap or craft grinding.

1. Welding parameters: welding current 25~30A, maintenance air flow 4~7L/min.

2. Arcing must be carried out on the flange tube length, and the arc should be on the thick tube. The outer arc flame is used to heat the ripple tube, and the edge of the ripple tube is blocked with the welding wire, and the molten stainless steel welding wire is used to melt the ripple tube.

3. The welding time must be carried out in the thick pipe length, short weld welding or spot welding should be used for welding.

4. When welding, always observe the melting of the ripple tube. Individually melt 1 to 3 molten pools at a time. Continuous welding is not suitable, especially when the gap is large, it is easy to burn through.


You Might Also Like

Send Inquiry