How To Remove The Magnetism Of Stainless Steel Flanges
1. The chemical equivalent composition is not well controlled. In order to reduce costs, manufacturers generally control the lower limit of Ni at 8.0-8.2%. When Cr/Ni reaches a certain value, a certain amount of ferrite appears in the steel structure. Ferrite is magnetic. In this case, the ferrite can be completely dissolved into the austenite by solution treatment at 1050~1080℃, and it will not be magnetic.
2, cold work hardening. When cold working austenitic stainless steel flanges, deformed martensite is produced. Deformed martensite increases the strength of stainless steel flanges, while deformed martensite is magnetic. Solution treatment or even annealing can make the deformed martens disappear, but the strength of the steel will decrease.
