There Are Several Types Of Flange Sealing
The flange sealing surface has full plane FF, raised surface RF, convex surface M, concave surface F, tenon surface T, groove surface G, and ring connecting surface RJ. Generally, the concave-convex surface MF and the tongue and groove surface TG are used in pairs.
The flat flange sealing surface has the advantages of simple structure, convenient processing, and convenient for anti-corrosion lining. Due to the large contact area between the sealing surface and the gasket, the gasket is easy to be squeezed out of the sealing surface if the pre-tightening is improper. It is not easy to compress, and the sealing performance is poor. It is suitable for occasions where the pressure is not high. It is generally used under the pressure of PN≤2.5Mpa.
The sealing surface of the raised face flange is flat, and the contact area with the gasket is large. After pre-tightening, the gasket is easy to stretch or move to both sides, and the sealing performance is poor. It is only suitable for low pressure occasions.
Concave-convex flange sealing surfaces match the two flange joint surfaces, one is concave and the other is convex. It is easy to align during installation and can prevent the gasket from being squeezed out of the sealing surface. The sealing performance is better than that of flat sealing.
